Federal investigator hasn’t determined whether bolts were installed on the 737

Washington
CNN
 — 

Investigators probing why part of a Boeing 737 Max 9 blew open mid-flight earlier this month have not yet determined if bolts were installed on that piece of the aircraft.

National Transportation Safety Board Chairwoman Jennifer Homendy told reporters after a closed-door briefing for lawmakers Wednesday that the investigation into is ongoing. Investigators are determining why a door plug, which is supposed to cover up a space left by a removed emergency exit door in the side of the plane, blew off Alaska Airlines flight 1282 on January 5 and left a gaping hole in the side of the plane.

She said the investigation is not solely focused on the bolts, and her teams are currently collecting extensive records on the assembly of the door plug and its journey from Malaysia, where it was first built, to factories in Wichita, Kansas and Renton, Washington.  It was unclear, she said, whether Boeing employees removed the plug from the airplane fuselage when it arrived in Renton from its subcontractor, Spirit Areosystems.

Scientists in the NTSB’s lab are currently scrutinizing the plug but have not yet started disassembling it, she said.

“They have very bright lighting.  They’re doing targeted photography,” Homendy said.  “They might take some metal shavings and put them under the electron microscope.”

Then next week, NTSB officials will begin pulling the door plug apart to further examine its construction.

Homendy said she and the head of the Federal Aviation Administration, who participated in the Senate Commerce Committee briefing virtually, have been talking once or twice most days.

Expanded probe

The FAA announced Wednesday that it is expanding its probe into Boeing 737 Max 9 quality control following this month’s in-flight blowout.

In a new statement, the FAA says it is now investigating contractor Spirit AeroSystems, which builds the fuselage of the Boeing 737 Max 9. The FAA last week opened an investigation into Boeing’s quality control after the Alaska Airlines incident.

The FAA says the investigation will focus on whether Boeing “failed to ensure completed products conformed to its approved design and were in a condition for safe operation in compliance with FAA regulations.” Boeing said it “will cooperate fully and transparently with the FAA and the NTSB on their investigations” in a statement last Thursday.

Spirit Aerosystems did not immediately respond to a request for comment.

The FAA says all 171 Boeing 737 Max 9s in the United States remain grounded, the agency has received new data from preliminary inspections of 40 of those airplanes.

“The first 40 inspections that are part of that process are now complete, and the FAA will thoroughly review the data from them,” the FAA said in a statement. “Once the FAA approves an inspection and maintenance process, it will be required on every grounded 737-9 Max prior to future operation.”

To help restore confidence in its manufacturing, Boeing said Monday it will allow airlines into Boeing factories and those of Spirit AeroSystems.

Shareholders of Spirit AeroSystems last year filed a federal lawsuit against the company, accusing it of “widespread and sustained quality failures” in its products.

The suit states that quality failures, which have allegedly ranged from debris in products to missing fasteners and peeling paint, led Boeing to place Spirit on probation from around 2018 to at least 2021. The suit, which was previously reported by the publication The Lever, does not specifically mention door plugs.

The suit claims that “constant quality failures resulted in part from Spirit’s culture which…